![asus battery health charging buttons disabled asus battery health charging buttons disabled](https://i.gadgets360cdn.com/large/asus_rog_phone_3_battery_ndtv_1596442002797.jpg)
- #Asus battery health charging buttons disabled drivers#
- #Asus battery health charging buttons disabled driver#
Bumblebee can be used to take advantage of the NVIDIA card.įour level positions (0 to 3) available with
#Asus battery health charging buttons disabled drivers#
The card works with nvidia drivers from the official repository. The secondary card is combined with the main graphics in a hybrid NVIDIA Optimus configuration. $ lspci | grep 'NVIDIA.*GeForce' 03:00.0 3D controller: NVIDIA Corporation GM108M (rev a2) Secondary graphics card is NVIDIA GeForce 840M (UX303LN model). $ lspci | grep 'Intel.*Graphics' 00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b) The main graphic chipset is an Intel Haswell chipset, which works well with the i915 xorg driver. The Bluetooth chipset is an intel N7260 model (same as the wifi chipset), which works well. It works well with recents kernel (fails with 3.2.0 kernel) with the iwlwifi kernel module and the firmware version 23.214.9.0. The wifi chipset is an Intel(R) Dual Band Wireless N 7260, REV=0x144. The webcam is an SuYin HF1019-T838-SN03 (USB 2.0, UVC) which works well. The 10-point multi touch works with libinput installed (tested with the tools/event-debug libinput test tool). The touchscreen is an Atmel maXTouch Digitize. Option "AccelProfile" "adaptive" # Optional If touchpad is not responsive, try changing these settings:
![asus battery health charging buttons disabled asus battery health charging buttons disabled](https://batteryexpert.com.au/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/s/-/s-l1600_6.jpg)
The sensitivity settings may need to be adjusted, because of the large touchpad area.
#Asus battery health charging buttons disabled driver#
Check which one by running with grep -e "using input driver " /var/log/Xorg.0.log The touchpad is supported by Touchpad Synaptics and libinput. ⎜ ↳ FocalTechPS/2 FocalTech FocalTech Touchpad id=14 # dmesg | grep FLT01 pnp 00:06: Plug and Play ACPI device, IDs FLT0101 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active) $ cat /sys/bus/acpi/devices/FLT0101\:00/status 15 $ xinput ⎡ Virtual core pointer id=2 The touchpad is a FocalTech model, that is supported by the Linux kernel since 4.0.1-1. $ cat /etc/systemd/system/rvice ĮxecStart=/usr/bin/hdparm -B 255 -S 0 /dev/sda KERNEL="sda", SUBSYSTEM="block", ACTION="add", RUN+="/usr/bin/hdparm -B 255 -S 0 /dev/sda" $ cat /etc/udev/rules.d/les # Configure hardisk power management: No more spin-down !! With ASUS Battery Health Charging technology, you can set the State of Charge to between 60 and 80 or 100 to extend battery life and reduce swelling risk. Compatibility Hard diskįor models with an SSD, see Solid State Drives.įor the models without a SSD as main disk, the hard disk stop/start each 30/60 seconds, add a udev rule : It is possible for a laptop battery to degrade, shorten its life, or become swollen as a result of overcharging. Note: If you experience problems with booting an Arch installation image, refer to the #Troubleshooting section below.